In a thick plastic film it packs groups of any products that usually need transport packaging: bottles, plastic bottles, cans, bags with free-running products.
The productivity of the complex depends on the speed of the operator and usually does not exceed 5 packages per minute.
This is a manual packaging complex with low productivity. Suitable for those who are just starting their own production and want to minimize the hardware costs. It is also used in warehouses of large enterprises, where sometimes there is a need to quickly repackage a group of products with damaged packaging.
UUV-600P+UT-600 consists of a packaging device and a thermo tunnel. A group of products is placed on the table and manually pushed into the UUV-600P packaging device, where the film sheets form a bag. After cutting the film, the packaged products are pushed by the next group into the heat tunnel where the film shrinks and tightens the products under the influence of hot air.
Packaging for
Types of package
Description
This is a manual packaging complex with low productivity. Suitable for those who are just starting their own production and want to minimize the hardware costs. It is also used in warehouses of large enterprises, where sometimes there is a need to quickly repackage a group of products with damaged packaging.
UUV-600P+UT-600 consists of a packaging device and a thermo tunnel. A group of products is placed on the table and manually pushed into the UUV-600P packaging device, where the film sheets form a bag. After cutting the film, the packaged products are pushed by the next group into the heat tunnel where the film shrinks and tightens the products under the influence of hot air.
Characteristics
Productivity, pack / hour | no more than 300 |
---|---|
Length | lengthy |
Width | up to 500 |
Height | up to 350 |
Packing material | PE shrink |
Film thickness, microns | from 50 to 120 |
The maximum width of the film roll, mm | no more than 590 |
Minimum film roll width, mm | 250 |
Diameter of a roll of a film, mm, no more | 400 |
Weight of a roll, kg, no more | 30 |
Chain speed, m / min | 2,06 |
Number of memorized programs, pcs | no |
Packer Power Supply | 220 V, 50 Hz |
Shrink tunnel power | 380 V, 50 Hz |
Power consumption, kW, no more | 18,5 |
Temperature range, * С | from 100 to 250 |
Body material | structural steel |
Contact surface material | Food approved materials |
Overall dimensions of the device (length × width × height), mm | 3350х900х1560 |
Weight, kg | 400 |
Доставка
Доставка осуществляется несколькими способами: 1) Заказчик самостоятельно забирает оборудование и груз едет от точки «А» до точки «Б» 2) Мы доставляем оборудование до терминала транспортной компании, которую выбрал заказчик в Казани - осуществляется нашими силами (собственный автотранспорт). 3) Срочные небольшие грузы (например запчасти), в этом случае прибегаем к помощи Авиаперевозок. 4) Четвертый способ «смешанный», когда оборудование может ехать сначала автотранспортом, далее ЖД перевозка, и после доставка речным транспортом. Отправка Груза в основном осуществляется транспортной компанией ПЭК, мелкие посылки через СДЭК Сроки доставки груза уточняйте у своего менеджера. В среднем, доставка осуществляется от 2 до 5 дней, дальние направления – от 1 недели. Оплата: 1) Оплачивается доставка, после этого ООО "Интеграл Плюс" по договору с транспортной компанией оплачивает выставленный счёт; 2) Оплата напрямую ТК по счёту.
Гарантия
Гарантия на 1 год. После покупки оборудования вы получаете гарантию на 1 год. Она включает в себя: - онлайн-консультации по пуско-наладке и отладке всех процессов; - доставку запчастей и ремонт за наш счет при необходимости; - решение всех вопросов, связанных с бесперебойной и продуктивной работой оборудования. Гарантия на 2 года. Для того чтобы получить заводскую гаратнию на 2 года, необходимо провести пусконаладочные работы. Гарантия на 3 года. Расширенную гарантию на 3 года можно приобрести за отдельную плату.